Product Info Long
Honeywell - Silent Knight 5496 - (Intelligent) Distributed Power Module.
The SILENT-KNIGHT-5496 is a 6 amp notification power expander that provides its own AC power connection, battery charging circuit, and backup battery for use with fire and security controls such as the IntelliKnight Model 5808 Fire Control/Communicator.
The 5496 is the cost-effective solution for powering notification appliances required by the Americans with Disabilities Act (ADA) and has built-in ANSI cadence pattern, which can upgrade older control panels that lack cadencecapability.
Features:
- UL Listed for 6 amps of notification power
- Power supplys advanced switch mode design reduces damaging heat and manages power up to 50% more efficiently than other systems
- Built-in synchronization for appliances from AMSECO, Gentex, Faraday, System Sensor, and Wheelock
- 24 VDC filtered output voltage
- Four power-limited notification outputs; 2 Class A or 4 Class B, or 1 Class A and 2 Class B
- NACs are programmable as Notification Appliance Circuits, or as auxiliary power to be used as constant, resettable, or door holder power
- 3 amps per output circuit
- Ground fault detector
- Communicates to the FACP via 4-wire SBUS (wire runs up to 6000 ft)
- AC loss delay option shuts off power to non-essential high-current accessories like magnetic door holders
- Lightweight design adds to ease of installation and reduces shipping costs
- UL 864,1481 & 1971 listed
- ANSI Cadence pattern output capability built-in
Technical Specifications:
- AC Input: 120 VAC at 2.7 A
- Output: 24 VDC at 6 amps
- Current: Standby 40 mA, Alarm 160 mA
- Notification/Aux.Power circuits: 4
- Output configuration: 2 Class A (Style Z), 4 Class B (Style Y) (1 Class A & 2 Class B)
- Amps per output circuit: 3.0 (6.0 amps total)
- Notification circuit output: 20.4 to 27.3 VDC, 3.0 amps each, 4.7k EOL resistor required on each Class B circuit
- Battery charging capacity: 35.0 AH
- Dimensions: 12.25 W x 16 H x3 D (30.88 Wx 40.64 H x7.62 D cm)
Home
