Fire Alarm

The Fire-Lite CMF-300 is an addressable control module that provides a supervised Class A or B circuit for notification appliances, like horns and strobes.By addressing the CMF-300, activation can be performed either manually or through panel programming...

The SILENT-KNIGHT-SK-CONTROL is an addressable notification module for use with Silent Knight IntelliKnight series fire alarm control panels (FACPs).The CONTROL gives you the flexibility to add notification circuits wherever they are needed on an...

The Fire-Lite MDF-300 Dual Monitor Module is intended for use in intelligent, two-wire systems. It provides two independent two wire initiating device circuits (IDCs) at two separate, consecutive addresses. It is capable of monitoring normally open...

  The SILENT-KNIGHT-ACCLIMATE is an intelligent, multicriteria smoke detector that incorporates both thermal and photoelectric technologies to maximize detection.The ACCLIMATE is for use with Silent Knight Intelliknight-series fire alarm control...

The SK-ZONE is an intelligent two-wire interface module for use with Honeywell Silent Knight Series fire alarm control panels (FACPs). The SK-ZONE allows a Silent Knight FACP to interface and monitor two-wire conventional smoke detectors.The SK-ZONE is...

Silent Knight SK-HEAT-W Addressable 2-Wire Fixed Heat Detector, Includes Base, White

ADDRESSABLE HEAT DETECTOR W/RATE-OF-RISE THERMAL SENSOR INCLUDES B210LP BASE

B3006IV DISCONTINUED BY MANUFACTURER MOUNTING BASE FOR USE WITH SMOKE DETECTOR 6 INCH FLANGED LOW PROFILE 15-32 VDC IVORY

The SYSTEM-SENSOR-B114LPBT is a 24VAC/DC detector base for use with the 2151 Special Applications Duct Smoke Detector and 1151 Ionization Detector Heads.The unit is intended for use in 4-wire systems with terminals provided for remote annunciator and...

Retro Fit 2-G Box Red Non-metallic 4x4 box for retrofit construction. Screw hole patterns for 4x4 and two-gang devices. Color Red. 27.5 cu. in. 2-Hour Fire Rating. 6 lb Rating for Walls, 10 lb rating for ceilings.

All metal construction Extremely easy to operate Bi-colored status LED indicates Standby and Alarm conditions Address is programmable in the EEPROM Address can be programmed when installed Terminals accept up to 14AWG wire ADA compliant (except D...