ELK

Trusted, professional grade step down transformer for low voltage systems, such as Access Control, Security & CCTV. Auto-Resetting (PTC) Fused Secondary Green Power On LED Grounding Prong &...

The ELK-M1TWI is an interface that can add up to 3 zones of two-way listen-in to the M1 Gold Control Panel.Two-way listen-in gives central station the ability to check in with residents after an...

BOX OF 100

The ELK-800 is compact, low cost audio amplifier designed for paging (public address) applications. The ELK-800 can be centrally or remotely installed. It operates on low voltage, thus saving money...

The ELK-912 is a high quality 12 Volt DC relay with SPDT (Form “C”) dry contacts. It features low current draw, positive or negative activation, and is ideal for general purpose switching of devices...

The ELK-129 Computer Sound Card Interface allows a computer’s speaker output to be used as one of the tools for programming sounds into the ELK Recordable Modules, such as the ELK-120 or ELK-124...

The ELK-999 contains 130 pieces of double faced 1/4″ thick closed cell foam tape with an aggressive pressure sensitive permanent adhesive on both sides. This tape can be used in place of mechanical...

The ELK-M1KP2 is a low profile, addressable LCD Keypad for the M1 family of Cross Platform Controls. It features a 32 character blue/white backlighted display, blue lighted keys, 4 programmable...

The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply.In the event of an extended power...

1) 4 position terminal block 1) 5 position terminal block 1) 7 position terminal block 1 )10 position terminal block 2) 12 position terminal blocks The ELK-M1BLOCKS is a complete set of plug-in...

These Power Distribution Modules conveniently distribute a single A.C. or D.C. input into nine individual outputs, for centrally powering Video Cameras, PIRs, Photobeams, etc. Each output is...

The ELK-P624 is a general purpose regulated power supply and battery charger. It is ideal for alarm, access control, and CCTV applications requiring up to 1 Amp continuous current. Automatic...

The ELK-MM220 from ELK is a Magic Module™ (ELK-MM220) is a two digital input, two form C relay output programmable controller. It may be used as a stand alone field programmable controller in a vast...

For use with the add-on proximity readers: ELK-M1PR for the ELK-M1KP keypad or ELK-106055 exterior reader. 10 PACK

The ELK-124 is an 8 channel recordable voice module. It is ideal for applications such as telephone on-hold announcements, security and access control warnings, museum narrations, and more. Each...

The ELK-912B is a heavy duty relay module featuring 12 or 24V DC selectable operation, SPDT Form “C” contacts, low current draw, voltage input LED, and high quality large cross-head terminals. It is...

The ELK-950 is an RJ31/38X Telephone Jack containing solid state transient suppression designed to protect both the Telephone and Low Voltage AC Transformer inputs on an alarm control. It responds to...

The ELK-924 Sensitive Relay module features DPDT (Form “C”) dry contacts for general purpose switching of devices or high current loads. It operates on 12 or 24 volts DC and can be triggered with a...

ELK-100 The ELK-100 Siren Driver is a great choice for residential and commercial security installations. It draws less current than most siren drivers, and offers two volume levels (example: one...

The ELK-74 is a Two-Tone (Yelp & Steady) Siren mounted in an attractive surface mount plastic enclosure. This versatile Echo™ Series siren is designed to be heard but not seen! Sound “echoes” off...

The ELK-45 is a loud self-contained electronic siren in a compact and attractive housing. This siren draws less current than many competitive units and features the ability to produce two distinct...

The ELK Interior/Exterior Horn Speaker, 8 Ohms (15 Watts) is a low-power speaker with powerful output. Ideal for security systems or paging applications in smaller areas, the loud Horn Speaker is...

30 Watt, 8 Ohm, Exterior Speaker Attached Mounting Bracket Main Features Tamp

Multi-Purpose Horn Style Speaker Great for Voice or Sounds High Fidelity Voice Coil Pre-Wired For Easy Installation Ideal for Alarm Systems or Paging Interior or Exterior use The 30 Watt, 8 Ohm,...

The ELK-1RT is a rugged 30 Watt, 8 Ohm speaker mounted in a tamper resistant, “No Rust” enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the Front Cover. The...

ELK-SP12F is a flush mount, interior speaker. It is ideal for alarm or voice applications and flush mounts for a clean, designer look. Installers will applaud the easy installation, utilizing...

STROBE LIGHT AMBER WEATHER RESISTANT AMBER STROBE LIGHT FEATURES: Indoor / Outdoor Durable Polycarbonate Easy to Install: Simple 2 Wire Hookup Works with pulsing alarm...

STROBE LIGHT AMBER WEATHER RESISTANT AMBER STROBE LIGHT FEATURES: Indoor / Outdoor Durable Polycarbonate Easy to Install: Simple 2 Wire Hookup Works with pulsing alarm...

STROBE LIGHT AMBER WEATHER RESISTANT AMBER STROBE LIGHT FEATURES: Indoor / Outdoor Durable Polycarbonate Easy to Install: Simple 2 Wire Hookup Works with pulsing alarm...

STROBE LIGHT AMBER WEATHER RESISTANT AMBER STROBE LIGHT FEATURES: Indoor / Outdoor Durable Polycarbonate Easy to Install: Simple 2 Wire Hookup Works with pulsing alarm...

The ELK-951 is an RJ31/38X Telephone Jack containing solid state transient suppression designed to protect the Telephone inputs on an alarm control. It responds to power surges and transients in less...

The ELK-RJSET is for use with Alarm System Communicators, Line Fault devices, or other equipment as a means of connecting to the incoming telephone line. Includes USOC RJ31X 8 pin modular surface...

The Elk UltraProx Wiegand Reader is a compact, technically advanced external proximity reader with 26 bit Wiegand output for use with a separate controller. Compatible with Elk M1 control panels and...

ELK-110 The ELK-110 Voice “Talking” Driver features high quality digitally pre-recorded voice messages and loud attention getting siren sounds in an economical, low current draw, compact package...

he ELK-WK1 is a an optional wall mount kit for use with the ELK-SL1 Strobe Light. The kit features a decorative snap-on trim cover with all hardware for mounting the strobe to any flat surface or...

The ELK-902-2 premium quality “B” connectors are manufactured from the finest materials. They feature insulation piercing internal teeth, soft brass (easy to squeeze) crimp, a durable protective...